Canon C50i Instruction Manual - Page 15

ENGLISH Before You Use the Product Connecting to the Multiconnector Use the procedure below to plug leads (AWG No.28-18) into the multiconnector plug. 1. Insert a flat-bladed screwdriver all the way into the slot next to the lead fastening hole. ■ The inside of the lead fastening hole opens. 2. With the screwdriver still inserted, push the end of the lead into the lead fastening hole. 3. Holding the lead securely so that it does not come out of the lead fastening hole, pull out the screwdriver. ■ The lead is secured inside the lead fastening hole. Use the same procedure to connect all the required leads. Attaching the Multiconnector to the Camera 1. Raise the levers on each side of the multiconnector plug. Lead B1 B10 A10 2. Push the multiconnector plug into the multiconnector socket. B1 B10 A10 3. Push the multiconnector plug in fully. ■ The multiconnector plug is locked into the socket on the rear of the camera. To remove the multiconnector, push the levers on both sides downwards at the same time. B1 B10 A10 15