Canon C50i Instruction Manual - Page 20

Loading the Batteries into the Wireless Controller - vc u

Page 20 highlights

Controlling the Camera from the Wireless Controller Loading the Batteries into the Wireless Controller The wireless controller requires two AA-type batteries. 1. Remove the battery cover. 2. Insert the batteries. ■ Taking care that the poles (+ and -) are correctly positioned. 3. Replace the battery cover. aWARNING Observe the following precautions when handling batteries. Failure to do so could result in the batteries bursting or emitting heat, sparks or corrosive fluid. ● Do not throw the batteries into a fire, and do not heat, short-circuit or attempt to disassemble the batteries. ● Do not attempt to recharge the batteries. Operable Range of the Wireless Controller Use the wireless controller within the range described below, facing it toward the sensor for the wireless controller. The operable range of the wireless controller varies depending on the amount of charge remaining in the batteries and interference from other objects. (This applies equally to the VC-C50iR.) 5 m (16.4 ft.) 90° 30° 90° 30° 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

20
Controlling the Camera from the Wireless Controller
The wireless controller requires two AA-type batteries.
1.
Remove the battery cover.
2.
Insert the batteries.
Taking care that the poles (+ and –) are
correctly positioned.
3.
Replace the battery cover.
Operable Range of the Wireless Controller
Use the wireless controller within the range described below, facing it toward the sensor for
the wireless controller. The operable range of the wireless controller varies depending on the
amount of charge remaining in the batteries and interference from other objects. (This applies
equally to the VC-C50iR.)
Loading the Batteries into the Wireless Controller
Observe the following precautions when handling batteries.
Failure to do so could result in the batteries bursting or emitting heat, sparks or
corrosive fluid.
Do not throw the batteries into a fire, and do not heat, short-circuit or attempt
to disassemble the batteries.
Do not attempt to recharge the batteries.
a
WARNING
90°
(16.4 ft.)
30°
5 m
30°
90°