Canon C50i Instruction Manual - Page 38

Troubleshooting Check the following before contacting your Canon supplier. The wireless controller does not work. Check 1: The LED is not lit. Response: Check that the plug is inserted into the main power outlet correctly and pushed in all the way. → P.18 Check 2: The LED is red. Response: The camera is switched off. Press the p button on the wireless controller to switch the camera on. → P.26 Check 3: The LED is orange. Response: Operation is restricted by the ID mode function. Reset the ID correctly or cancel ID mode operation. → P.35-37 Check 4: Does the LED blink green when you use the wireless controller? Response: • Check the remaining charge in the wireless controller batteries. • Ensure that you are using the wireless controller inside its effective range. → P.20 There is no picture on the monitor. Check 1: The LED is red. Response: The camera is switched off. Press the p button on the wireless controller to switch the camera on. → P.26 Check 2: The components are not all connected correctly. Response: Check that the components are all connected correctly. → P.14-15 Check 3: Power to the camera or monitor is not switched on. Response: Turn power on for the camera and monitor. → P.18 Cannot adjust the camera head angle properly. Check 1: The camera head will not move to the limit of its range of movement. Response: Something has directly moved the camera head. Press the h button on the wireless controller. → P.21 Check 2: Restrictions have been applied to the range of camera head movement. Response: Change the range of camera head movement. → P.31 38