Canon C50i Instruction Manual - Page 18

Before You Use the Product Turning the Power ON and OFF The VC-C50i/VC-C50iR camera does not have a power switch. You can switch the camera on by plugging the AC adapter into a wall outlet. When power to the camera is switched on, the LED on the camera turns green. If the monitor is switched on, an image appears on the screen. to AC outlet Camera Monitor AC cable AC adapter ● Whenever you turn the camera on, the first use of the PC or wireless controller to control the camera initializes the camera head position. NOTE (Initialization takes several seconds.) The LED on the camera flashes green (at 1-second intervals) during initialization. ● Never touch the camera head during initialization. This could prevent successful initialization and cause faults. ● Wait at least five seconds before turning the power back on after shutting it off. Turning it on too quickly may result in a malfunction. Observe the precautions given in "a Safe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS" (→ P.7-9). LED Displays and the Camera Status LED Display Camera Status Green Camera is on. (→ P.26) Blinking green At 0.1-sec. intervals At 0.5-sec. intervals Wireless controller button being used. Storing or restoring a preset (→ P.25), or displaying a setting menu. (→ P.27) Orange At 1-sec. intervals Camera head position initialization in progress. Individual camera operation in progress and this camera is not selected. (→ P.36) Blinking orange Red Off At 0.1-sec. intervals At 0.5-sec. intervals Camera is not selected for individual operation and is being controlled from the wireless controller. (→ P.36) The camera is being selected or deselected for individual operation. (→ P.36) Camera is off. (→ P.26) Power is off. (Power is not connected to the camera.) 18