Canon CanoScan D646U CanoScan D646U Product Guide - Page 7

Setup and Operating Conditions

Page 7 highlights

Setup and Operating Conditions • Please use in an area where the following temperature and humidity conditions can be met. Surrounding temperature: 10 degrees - 35 degrees C (50 degrees - 95 degrees F) Surrounding humidity: 10% - 90% RH (without condensation) • Please use where the electrical conditions (normal home outlets) can be met in your country. • Make certain there is plenty of clear space around the scanner. (Below is a diagram looking straight down on the scanner) Approx. 10 cm (4 in) Approx. 20 cm (8 in) Approx. 10 cm (4 in) • Set up the scanner so that the cable reaches from the scanner to the electrical outlet. • Do not set up in areas where there is an excessive fluctuation in temperature. Also do not move the equipment from low temperature areas to hight temperature areas. Condensation may cause image errors. Leave the scanner enough time to gradually adapt to the new conditions before use. • Do not use the scanner in areas subject to direct sunlight. The humidity may rise inside the equipment and cause damage or decrease image quality. If you have to use the scanner in direct sunlight, make sure to use a thick curtain to block the light. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

7
Setup and Operating Conditions
Please use in an area where the following temperature and humidity conditions can be met.
Surrounding temperature:
10 degrees - 35 degrees C (50 degrees - 95 degrees F)
Surrounding humidity:
10% - 90% RH (without condensation)
Please use where the electrical conditions (normal home outlets) can be met in your
country.
Make certain there is plenty of clear space around the scanner.
(Below is a diagram looking straight down on the scanner)
Set up the scanner so that the cable reaches from the scanner to the electrical outlet.
Do not set up in areas where there is an excessive fluctuation in temperature. Also do not
move the equipment from low temperature areas to hight temperature areas.
Condensation may cause image errors. Leave the scanner enough time to gradually adapt
to the new conditions before use.
Do not use the scanner in areas subject to direct sunlight. The humidity may rise inside the
equipment and cause damage or decrease image quality. If you have to use the scanner in
direct sunlight, make sure to use a thick curtain to block the light.
Approx. 10 cm
(4 in)
Approx. 20 cm
(8 in)
Approx. 10 cm
(4 in)