Canon Canon CX-G2400 2 Inkjet Card Printer CX-G2400 Basic Operation Guide - Page 46
Refer to Changing the Print Quality and Adjusting the Color User's
View all Canon Canon CX-G2400 2 Inkjet Card Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Troubleshooting Condition The printing is blurred. Solution Confirm that the paper set (size, shape, and type) matches the paper (size, shape, and type) configured by the application software or printer driver. The color deviation appears on the print. Clean the print head. Refer to "Cleaning the Printhead" (User's Guide). If you are using the printer at low temperature (Room temperature is 14 degrees Celsius (57 degrees Fahrenheit) or lower) : Open the [Utility] tab in the printer driver and then select the [Low Temperature Print Mode] in the [Special Settings]. Refer to "Changing the Special Settings" (User's Guide). Confirm that the paper set (size, shape, and type) that displays color deviation matches the paper (size, shape, and type) configured by the application software or printer driver is the same. Adjust the position of the printhead. Refer to "Adjusting the Printhead Position" (User's Guide). Set the resolution to [Input resolution 1200dpi] (prioritize image quality) and then print. Refer to "Changing the Print Quality and Adjusting the Color" (User's Guide). If you have several printers, check that you have not changed the printer and transport unit combinations. Because accurate adjustments are made between each printer and its transport unit, it is not possible to use a transport unit of another printer. The halftone representation is coarse. Open [Color] sheet of the printer driver, and set the [Half-tone] to [Error Diffusion]. Refer to "Changing the Print Quality and Adjusting the Color" (User's Guide). The area around characters or the layer areas appear uneven. Open the printer driver's [Color] sheet and set the [Half-tone] to [Error Diffusion]. Refer to "Changing the Print Quality and Adjusting the Color" (User's Guide). Confirm that the paper set (size, shape, and type) matches the paper (size, shape, and type) configured by the application software or printer driver. 43