Canon Color imageCLASS MF9220Cdn imageCLASS MF9280Cdn/MF9220Cdn Basic Operatio - Page 491
<Send Data Size Limit> in <E-mail/I-Fax, <Color/File Format Settings>.
View all Canon Color imageCLASS MF9220Cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 491 highlights
Error Codes Error Code #0403 #0404 #0406 #0407 #0408 #0703 #0705 #0751 Description Action The job failed because the same file name existed. Generally, if the same file name exists, a file will be automatically renamed by adding a number, which ranges from 1 to 999, to the tail of its file name in order to avoid naming conflicts. However, this error occurred because the file with the same number already added to its file name existed. Rename the file, and then write the data again. The job failed because the write protect switch of Turn OFF the write protect switch of the USB the USB memory was ON. memory. - The job failed because the medium was pulled - Confirm that the medium is properly inserted, out while the job was in progress. and then write the data again. - An error has occurred while data, such as image data, were being transferred to the medium. (The connected medium may be formatted with a file system that is not supported by the machine.) - Check the status of the medium, or make sure that the medium is formatted with a file system supported by the machine (FAT16 or FAT32), and then try again. - The length of the full path to the specified file - The limit of the length of the full path is 120. (or folder) exceeded the supported limit. Change or shorten the file name to be written. - The transfer of data has failed because the medium was pulled out during the transfer. - Confirm that the medium is correctly inserted and then try the transfer again. - An error has occurred while data, such as image data, were being transferred to the medium. - Check the status of the medium, or make sure that the medium is formatted with a file system supported by the machine. The memory for image data is full when sending color documents. - Wait a few moments, and then try sending again after other send jobs are complete. - Erase documents stored in memory. If the machine still does not operate normally, turn the main power OFF, and then back ON. The send process was interrupted because the size of the image data being sent was larger than the size limit set in in in in (from the Additional Functions screen). - Change the setting of the size limit in the in in in (from the Additional Functions screen). - Select a lower resolution. - If you are sending an I-fax, reduce the size of the data by decreasing the number of pages that contain images so that it will not exceed the size limit set in . - When scanning, set to in . The server is not functioning. The network is down (the server is unable to connect to the network or was disconnected). - Check the recipient's address. - Check that the network is up. Troubleshooting 12-36