Canon DC22 DC22 Instruction Manual - Page 80
One-Touch Dubbing - user manual
UPC - 013803063660
View all Canon DC22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
80 Connecting to a Computer - Setting the disc title - Initializing the disc - Finalizing or Unfinalizing the disc Check the orientation of the USB cable and make sure you connect it properly. If you use discs other than the recommended DVD discs you may get an error message on the computer indicating that the disc cannot be read or that the camcorder is not ready. NOTES DVD copies and DVD backup discs created with MyDVD for Canon cannot be unfinalized using the camcorder. One-Touch Dubbing (Windows XP only) POINTS TO CHECK This function requires a computer equipped with a DVD drive with writing capabilities. If MyDVD for Canon is running, close the program first. 1 Insert the finalized disc you wish to copy into the camcorder. 2 Insert a brand new DVD-R or DVD-RW disc into the computer's DVD drive. • The (print/share) button will light up in blue. • To make a copy of a disc recorded in VR mode, be certain to insert a DVD-RW disc into the computer's DVD drive. 3 Press . • The button will flash while the copying is in progress, and will go off once the copy is completed. • The copied disc will be finalized and automatically ejected from the drive. IMPORTANT DVD-R/RW discs can be copied to 12 cm or 8 cm DVD-R/RW discs. DVD-R DL discs can only be copied to 12 cm DVD-R/RW discs. If you did not complete the online user registration beforehand, you will not be able to use One-Touch Dubbing. Operation may not work properly if you connect more than one Canon camcorder to the computer at the same time. NOTES If the operation is interrupted: "OPERATION CANCELED" will be displayed on the camcorder's screen. The message disappears when you remove the disc or run MyDVD for Canon. When the DISC access indicator is on or flashing do not perform the following actions. Doing so may result in permanent data loss. - Do not subject the camcorder to vibrations or strong impacts. - Do not open the disc cover and do not remove the disc. - Do not disconnect the USB cable. - Do not turn off the camcorder or the computer. - Do not change the position of the / switch or the operating mode. You need to have DVD playback software installed in your computer in order to play the disc. We recommend powering the camcorder using the compact power adapter while it is connected to the computer. Refer also to the computer's instruction manual. For further details about restrictions when using MyDVD for Canon, refer also to the "README" section in the software's help modules. The following recordings cannot be transferred to the computer using MyDVD for Canon: - Recordings made in LP mode in widescreen (16:9 aspect ratio) on a DVD-RW initialized in VR mode. - Photomovie scenes created with this camcorder. Depending on the number and length of the scenes recorded, the One-Touch Dubbing may take some time. In the following cases, the button will not light up in step 2 and you cannot use the One-Touch Dubbing function: - The online user registration was not completed correctly. - MyDVD for Canon is still running.