Canon EOS-1D X Mark III EOS-1DX Mark III Advanced User Guide - Page 132
Selecting an image recorded on a card
View all Canon EOS-1D X Mark III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Note Custom white balances can also be registered as follows. 1.Press the < > button, then turn the < > dial to select < > ( ). 2.Next, turn the < balance to. > dial to select a number to register the custom white 3.Press the < > button. → The number selected in step 2 blinks on the top LCD panel. 4.Shoot a plain white object as described in step 4. → The custom white balance will be registered to the selected number. If [Correct WB may not be obtained with the selected image] is displayed in step 4, return to step 1 and shoot again. Your shot in step 4 is not recorded to a card. More accurate white balance can be obtained by shooting a commercially available gray card or standard 18% gray reflector instead of a white object. Selecting an image recorded on a card 1. Shoot a plain white object. Shoot a plain white object as described in step 4 in Shooting and registering white balances. 2. On the [ ] tab, select [Set Custom WB]. 132