Canon EOS-1D X Mark III EOS-1DX Mark III Advanced User Guide - Page 727

72: Cannot connect to sender camera Are you following the correct procedure to establish the connection with the sender camera? • Operate the sender camera by following the correct instructions. Is the sender camera too far from the receiver cameras? • Bring the sender camera closer to the receiver cameras. 73: Could not synchronize the time Are you following the correct procedure to establish a connection between the sender and receiver camera? • Operate the sender and receiver cameras by following the correct instructions ( ). Is the sender camera too far from the receiver cameras? • Bring the sender and receiver cameras closer together. 81: Wired LAN connection lost Is the LAN cable securely connected? • Reconnect the LAN cable between the camera and server. Because the cable may be severed, try using another cable to connect the devices. Is the hub or router on? • Turn on the hub or router. Is the server on? • Turn on the server. The server may have been turned off because of an energysaving mode. 83: Network connection terminated due to overheating Communication has temporarily stopped due to high internal camera temperature, and the camera has ended the wired LAN connection. • Allow the camera to cool down, as by shading it from direct sunlight. Once the camera has cooled down, the connection will be restored automatically. 91: Other error A problem other than error code number 11 to 83 occurred. • Turn the camera's power switch off and on. 727