Canon EOS-1D X Mark III EOS-1DX Mark III Advanced User Guide - Page 835
Number of bracketed shots, Spot meter. linked to AF pt
View all Canon EOS-1D X Mark III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 835 highlights
Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the following table. 3: 3 shots 2: 2 shots 5: 5 shots 7: 7 shots 3: 3 shots 2: 2 shots 5: 5 shots 7: 7 shots 1st Shot Standard (0) Standard (0) Standard (0) Standard (0) (1-stop/step increments) 2nd Shot 3rd Shot 4th Shot 5th Shot 6th Shot 7th Shot -1 +1 ±1 -2 -1 +1 +2 -3 -2 -1 +1 +2 +3 Note If [2 shots] is set, you can select the + or - side when setting the AEB range. With WB bracketing, the second shot is adjusted toward the negative side for the B/A or M/G direction. Spot meter. linked to AF pt You can enable AF point-linked spot metering in < > metering mode. Center AF point only Spot metering is always performed at the center of the viewfinder, regardless of the AF area selection mode or selected AF point. Linked to active AF point Spot metering is linked to the manually selected AF point. Note that spot metering is performed at the center of the viewfinder when the AF area selection mode is Automatic selection AF, Zone AF, or Large Zone AF. With an external flash, FE lock linked to a manually selected AF point is available, and this function can also be used with metered manual flash exposure ( ). 835