Canon EOS 5D EOS DIGITAL Software Instruction Manual Macintosh - Page 35

Camera Settings You can specify settings for the camera such as the camera owner's name, the date and time, Personal Functions and all shot settings. 1 Select the [Set to Camera] tab. ¿ The [Set to Camera] tab sheet appears. 2 Click the [Confirms/changes camera settings] button. ¿ The [Camera Settings] dialog box appears. Basic Settings You can specify camera owner's name and the date and time on the camera, and confirm the status of the camera's battery and memory card. 1 Display the [Camera settings] dialog box. 2 Select the [Basic settings] tab. ¿ The [Basic settings] tab sheet appears. 3 Specify the desired settings. Cover/Table of Contents Introduction 1 Downloading Images from the Camera, and Camera Settings 3 Select a tab and specify the camera settings. You can set up Personal Functions You can apply to the camera all settings and apply the settings to the camera relating to the images shot by the camera. (p.4-3). You can specify camera owner's name and shooting date/time on the camera, and confirm the camera properties data and the status of the battery and the memory card. O With the EOS 5D, only the [Basic settings] tab and [Shot settings] tab are displayed. O With the EOS-1Ds and EOS-1D, the [Basic Settings] tab and the [Detailed Settings] tab are displayed. In the [Detailed Settings] tab sheet, you can set Personal Functions (p.4-3), processing parameters (p.4-12) and personal white balance (p.414), and apply the settings to the camera. Enter the camera owner's name. You can enter up to 31 characters. Enter a value or click the [S]/[T] buttons to specify the date and time. The battery level of the camera is indicated by [ ] or [ ]. When you are using the DC Coupler Kit supplied with the camera or the AC Adapter Kit (optional), [ ] or [AC] is displayed. Displays the information relating to the camera. Imports the date and time from your computer. Displays the information relating to the memory card inside the camera.* Applies the settings to the camera. Applies the settings to the camera and closes the dialog box. Cancels all the settings and closes the dialog box. * With the EOS 5D, EOS-1Ds and EOS-1D, the [Format] button is displayed in the CF card information display. You can initialize the CF card by clicking this button. Be careful as [Format] will delete the entire recorded contents on the CF card. O The above window shows information displayable when the EOS-1D Mark II N is connected. The displayed information varies depending on the camera model connected. 4 Click the [OK] button. ¿ The settings are applied and the [Camera settings] dialog box closes. 2 Working with Images in the ImageBrowser 3 Remote Shooting in the EOS Capture 4 Setting the EOS 5D and EOS-1D Series Cameras 5 Troubleshooting and Uninstalling the Software Index 4-2