Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit Instruction Manual - Page 34
Installing and Removing the Battery
View all Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing and Removing the Battery Load a fully charged Battery Pack LP-E17 into the camera. The camera's viewfinder becomes bright when a battery is installed, and darkens when the battery is removed. Installing the Battery 1 Open the cover. Slide the lever as shown by the arrows and open the cover. 2 Insert the battery. Insert the end with the battery contacts. Insert the battery until it locks in place. 3 Close the cover. Press the cover until it snaps shut. Removing the Battery Open the cover and remove the battery. Press the battery release lever as shown by the arrow and remove the battery. To prevent short circuiting of the battery contacts, be sure to attach the protective cover (provided, p.32) to the battery. After opening the battery compartment cover, be careful not to forcefully swing it back further. Otherwise, the hinge may break. 34