Canon HF100 VIXIA HF10/VIXIA HF100 Instruction Manual - Page 100
Recording, Playback
UPC - 013803092004
View all Canon HF100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Additional Information Recording Pressing START/STOP will not start recording. - You cannot record while the camcorder is writing previous recording onto the memory (while the ACCESS indicator is on or flashing). - The memory is full or it already contains the maximum number of scenes. Delete some recordings ( 43, 65) or initialize the memory ( 33) to free some space. The point where START/STOP was pressed does not match the beginning/end of the recording. - There is a slight interval between pressing START/STOP and the actual start of recording. This is not a malfunction. The camcorder will not focus. - Autofocus does not work on the subject. Focus manually ( 50). - Lens or Instant AF sensor is dirty. Clean the lens or sensor with a soft lens-cleaning cloth ( tissue paper to clean the lens. 114). Never use When a subject flits across in front of the lens, the image appears slightly bent. - This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in front of the camcorder, the image may seem slightly warped. This is not a malfunction. Changing the operating mode between recording ( )/record pause ( )/playback ( ) takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Back up your recordings ( 82) and initialize the memory ( 33). Reviewing the last scene recorded takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Back up your recordings ( 82) and initialize the memory ( 33). Cannot record a still image. - In mode: You cannot record a still image if simultaneous recording (FUNC. menu) is set to [STILL I. REC OFF] ( 68), or if either the digital zoom ( 92) or a digital effect ( 53) is activated. Playback Cannot add scenes to the playlist. - You cannot add more than 999 scenes to the playlist. - You may not be able to add scenes to the playlist if they were recorded or edited using another device. Cannot delete a scene. - You may not be able to delete scenes recorded or edited using another device. Deleting scenes takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Back up your recordings ( 82) and initialize the memory ( 33). Cannot erase a still image. - The still image is protected. Remove the protection ( 70). 100