Canon LV 5210 lv7210_series_exp_cmd.pdf - Page 16
Cf_tintcommand, Cf_sharpcommand, Cf_gammacommand, Expand Serial Commad Functional Specification
View all Canon LV 5210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.4 CF_TINTCOMMAND COMMAND "CF_TINT_%1" [CR] "000-063"------ Directly select for Tint setting value %1 "UP Current Setting value +1 "DN Current Setting value-1 Details Set the user Control tint value. The value set by this command will not be save to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is in the NORMAL Power ON state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.5 CF_SHARPCOMMAND COMMAND "CF_SHARP_%1" [CR] "000-015"------ Directly select for Gamma setting value %1 "UP Current Sharpness setting value+1 "DN Current_Sharpnes ssetting value -1 Details Set the user Control Sharpness value. The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is the usual Power ON state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.6 CF_GAMMACOMMAND COMMAND "CF_GAMMA_%1" [CR] "000-015"------ Directly select for-GAMMA setting value %1 "UP GAMMA setting value+1 "DN GAMMA setting value-1 Details Set the User Control-GAMMA Value The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] Page 16