Canon LV 5210 lv7210_series_exp_cmd.pdf - Page 21
Cf_pc Storecommand, Cf_pc Mode Freecommand, 6 Video Control Command, Cf_avddots Command
View all Canon LV 5210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.8 CF_PC STORECOMMAND COMMAND "CF_PCSTORE_%1" [CR] "MODE1" --- Store current PC Adjust status to MODE 1 "MODE2" ...Store current PC Adjust status to MODE 2 %1 "MODE3" ...Store current PC Adjust status to MODE 3 "MODE4" ...Store current PC Adjust status to MODE 4 "MODE5" ...Store current PC Adjust status to MODE 5 Details Store current PC Adjust status (each parameter status such as Total dots) to MODE1-5. This command operates the same operation as storing to MODE1-MODE5 in PC Adjust Menu. (Only valid when it is in the usual Power ON status.) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.5.9 CF_PC MODE FREECOMMAND COMMAND "CF_PCMODEFREE_%1" [CR] "MODE1" ...reset MODE 1 to Free "MODE2" ...reset MODE 2 o Free %1 "MODE3" ...reset MODE 3 o Free "MODE4" ...reset MODE 4 to Free "MODE5" ...reset MODE 5 to Free Details Reset MODE 1, 2, 3, 4, and 5 to Free. This command works as the same when resetting Modes in PC adjust menu. (Only valid when it is in the usual Power ON status.) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.6 VIDEO Control COMMAND 8.6.1 CF_AVDDOTS COMMAND COMMAND "CF_AVDDOTS_%1" [CR] %1 "UP"...........Current setting value +1 "DN Current setting value -1 Details Set AV Service MODE Horizontal Resolution. (Only valid when it is in the usual Power ON status.) The setting value is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. When there e is no signal, the projector returns "101" [CR]. Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO Page 21