Canon LV 5210 lv7210_series_exp_cmd.pdf - Page 30
Cf_on-stacommand, 11.9 Cf_p-manecommand, 11.11 Cf_fanspeedcommand
View all Canon LV 5210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Unacceptable "Error Code" [CR] 8.11.8 CF_ON-STACOMMAND COMMAND "CF_ON-STA_%1" [CR] %1 "ON"------ Select Power On Start "OFF"---- Cancel Power On Start Details Set/Cancel Power ON Start. (Only valid when it is in the usual Power ON status.) The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.9 CF_P-MANECOMMAND COMMAND "CF_P-MANE_%1" [CR] "OFF Set Power management to OFF %1 "READY"-------- Set Power management to Ready "SHUTDOWN"-- Set Power management to Shut Down Details Set/Cancel Power management.(Only valid when it is in the usual Power ON status.) The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.10 CF_P-MANETIMECOMMAND COMMAND "CF_P-MANETIME_%1" [CR] "01"-"30"-- Directly set the time by the minute %1 "UP Set the time 1 minute longer "DN Set the time 1 minute shorter Details Set Power management time. (Only valid when it is in the usual Power ON status.) The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.11 CF_FANSPEEDCOMMAND COMMAND "CF_FANSPEED_%1" [CR] %1 "MAX"------Select maximum speed "NOR"------Select NORMAL speed Details Change Fan Control speed. Only valid when it is in the usual Power ON status.) The value set is stored in EEPROM When ALL OFF the projector the Page 30