Canon LV 5210 lv7210_series_exp_cmd.pdf - Page 20
CF_V-POS COMMAND, CF_DLINECOMMAND, Set Display Line of PC signal
View all Canon LV 5210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.5 CF_V-POS COMMAND COMMAND "CF_V-POS_%1" [CR] "0000-nnnn"-- Directly set Vertical Position "nnnn" means maximum value. %1 This value is from current Total Line value - display Line value. "UP Vertical Position setting value +1. "DN Vertical Position setting value-1 Details Set vertical position of PC signal. Only valid when it is in the usual Power ON status.) The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (stays in STANDBYMODE) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.5.6 CF_DDOTS COMMAND COMMAND "CF_DDOTS_%1" [CR] "0100-nnnn"-- Directly set Display Dots value. "nnnn" means maximum value. This value is from current Total Dots value-Horizontal %1 position value "UP Display Dots +1 "DN Display Dots -1 Details et Display Dots of PC signal The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (stay in STANDBYMODE.) (stays in STANDBYMODE.) (Only valid when it is in the usual Power ON status.) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.5.7 CF_DLINECOMMAND COMMAND "CF_DLINE_%1" [CR] "0100-nnnn"-- directly specify display Line value. "nnnn" means maximum. This value is from current Total Line value - Vertical %1 Position value. "UP Display Line +1 "DN Display Line -1 Details Set Display Line of PC signal(Only valid when it is in the usual Power ON status.) The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (stays in STANDBYMODE.) (stays in STANDBYMODE.) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO Page 20