Canon LV 5210 lv7210_series_exp_cmd.pdf - Page 19
CF_TDOTS COMMAND, CF_CLAMP COMMAND, Set Total Dots of PC signal.
View all Canon LV 5210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.2 CF_TDOTS COMMAND COMMAND "CF_TDOTS_%1" [CR] "nnnn-9999"-- Directly set Total Dots value "nnnn" is minimum value. %1 This is current Display Dots value+Horizontal position value "UP Total Dots setting value +1 "DN Total Dots setting value-1 Details Set Total Dots of PC signal.(Only valid when it is in the usual Power ON status.) The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (Standby MODE stays) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.5.3 CF_CLAMP COMMAND COMMAND "CF_CLAMP_%1" [CR] "0000-0127"---- Directly set Clamp setting value %1 "UP Clamp setting value +1 "DN Clamp Setting value -1 Details Set Clamp of PC signal(. Only valid when it is in the usual Power ON status.) The value set by this Command will not be saved to the projector.. Therefore, when ALL OFF the projector, the value will return to the original setting. (stay in STANDBYMODE.) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.5.4 CF_H-POS COMMAND COMMAND "CF_H-POS_%1" [CR] "0000-nnnn"-- Directly set Horizontal Position "nnnn" means maximum value. %1 This result of current Total dots value-Display dots. "UP Horizontal Position value +1 "DN Horizontal Position value-1 Details Set horizontal position of PC signal(. Only valid when it is in the usual Power ON status.) This value set by this Command will not be save do the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (stays in STANDBYMODE) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO Page 19