Canon LV 5210 lv7210_series_exp_cmd.pdf - Page 17
Cf_wbal-command, Cf_coltemp Command, Cf_progv Command
View all Canon LV 5210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.7 CF_WBAL-COMMAND COMMAND "CF_WBAL-%1_%2" [CR] "R RED %1 "G GREEN "B BLUE "000-063"-- Directly select color value by White Balance %1 determination %2 "UP Color value for White Balance %1 determination +1 "DN Color value for White Balance %1 determination -1 Details Set the user Control value by white balance %1 determination. The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.8 CF_COLTEMP COMMAND COMMAND "CF_COLTEMP_%1" [CR] "000"........ XLow %1 "001"........ Low "002".......MID "003"........ High Details Set the Color Temp.(When it is in usual Power ON state, this is valid.) The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.9 CF_PROGV COMMAND COMMAND "CF_PROGV_%1" [CR] "L1"------ Select Progressive MODE L1 %1 "L2"------ Select Progressive MODE L2 "OFF"----cancel Progressive Details Set/Cancel for Progressive. (When it is in usual Power ON state, this is valid.) The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] Page 17