Canon LV-5220 Serial Functional Specification - Page 10

Expand Serial Command Functional Specification Page 9 of 41 6. Status Read Command Table 6.1. Image Status Read Command Table Status read command CR_BRIGHT [CR] CR_CONT [CR] CR_COLOR [CR] CR_TINT [CR] CR_SHARP [CR] CR_GAMMA [CR] CR_WBAL-R [CR] CR_WBAL-G [CR] CR_WBAL-B [CR] CR_COLTEMP [CR] CR_PROGV [CR] CR_FILM [CR] CR_IMAGE [CR] CR_IMGGMD [CR] Item Read Brightness setting value Read Contrast setting value Read Color setting value Read Tint setting value Read Sharpness setting value Read Gamma setting value Read White Balance Red value Read White Balance Green value Read White Balance Blue value Read Color temperature setting Read Progressive setting Read Film mode setting Read Image mode setting Read Image-Gamma setting value 6.2. PC Status Read Command Table Status read command CR_FSYNC [CR] CR_TDOTS [CR] CR_CLAMP [CR] CR_H-POS [CR] CR_V-POS [CR] CR_DDOTS [CR] CR_DLINE [CR] CR_PCSTORE [CR] CR_SETPCADJ [CR] Item Read Fine Sync setting value Read Total Dots setting value Read Clamp setting value Read Horizontal Position setting value Read Vertical Position setting value Read Display Dots setting value Read Display Line setting value Read Free or Store is selected for PC Adj.; Mode1-5 Read Current PC signal for PC display status 6.3. Video Status Read Command Table Status read command CR_SERSYS [CR] Item Read selected current signal. When in Auto mode, it returns a result by Auto detect. 6.4. Input Status Read Command Table Status read command CR_INPUT [CR] CR_SOURCE [CR] CR_INPUT_%1 [CR] CR_SYSTEM [CR] Item Read selected Input Read selected Input Source Read Input and the Source Read selected system status in Input mode 6.5. Screen Status Read Command Table Status read command CR_SCREEN [CR] CR_FLSCREN [CR] CR_TRUE [CR] CR_KYSTNMODE [CR] Item Read selected screen size Read Full screen mode Read True mode setting Read Keystone Store mode setting 6.6. Lamp Status Read Command Table Status read command CR_LAMPREPL [CR] CR_LAMPMODE [CR] CR_PROJH [CR] Item Read information for Lamp replacement time Read Lamp mode status Read Projector total running time 6.7. Sound Status Read Command Table Status read command CR_VOLUME [CR] CR_MUTE [CR] Item Read Volume Value Read Sound Mute setting