Canon LV-5220 Serial Functional Specification - Page 13
Image Command, 4.1. CF_BRIGHT Command, 4.2. CF_CONT Command, 4.3. CF_COLOR Command, 4.4. CF_TINT
![]() |
UPC - 410000050200
View all Canon LV-5220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Expand Serial Command Functional Specification Page 12 of 41 8.4. Image Command 8.4.1. CF_BRIGHT Command Command "CF"_BRIGHT_%1" [CR] "000 - 063 Directly select the Bright setting value %1 "UP Bright setting value +1 "DN Bright setting value -1 Details Set the user control Bright value. The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.2. CF_CONT Command Command "CF_CONT_%1" [CR] "000 - 063 Directly select the Contrast setting value %1 "UP Contrast setting value +1 "DN Contrast setting value -1 Details Set the user control Contrast value. The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.3. CF_COLOR Command Command "CF_COLOR_%1" [CR] "000 - 063 Directly select the Color setting value %1 "UP Color setting value +1 "DN Color setting value -1 Details Set the user control Color value. The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.4. CF_TINT Command Command "CF_TINT_%1" [CR] "000 - 063 Directly select the Tint setting value %1 "UP Tint setting value +1 "DN Tint setting value -1 Details Set the user control Tint value. The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR]
![](/manual_guide/products/canon-lv5220-serial-functional-specification-3d35b3d/13.png)