Canon LV-7280 User Manual - Page 11

1. Introduction  Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of The Projector The LV-7385/LV-7380/LV-7285/LV-7280/LV-8310/LV-8215 is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), or audio-video equipment. You can use the projector on a tabletop or cart, from behind a screen, or permanently mounted on a ceiling*1. The remote control can be used wirelessly. *1 Do not attempt to mount the projector on a ceiling yourself. The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury. In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. Please consult your dealer for more information. Features you'll enjoy: • Quick Start, Quick Power Off, Direct Power Off Less than 4 seconds* after turning on the power, the projector is ready to display PC or video images. The projector can be put away immediately after the projector is powered down. No cool down period is required after the projector is turned off from the remote control or cabinet control panel. * The quick start time is only when [Standby mode] is set to [Normal] in the on-screen message. The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when projecting an image). See page 35. • Carbon Meter This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector's [Lamp mode] is set to [Quiet mode]. The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off and in the Information of the on-screen menu. • Less than 1W in standby condition with energy saving technology Selecting [Power-saving] for [Standby mode] from the menu can put the projector in power-saving mode that consumes less than 1W. • Long-life Lamp employed The Long-life lamp provides 4000 hours of use at the [Normal] for Lamp mode and 5000 hours of use at the [Quiet] for Lamp mode. • Direct power on and Power Management features The Direct power on (AC), Direct power on (Comp1), Power management, and Off timer features eliminate the need to always use the POWER button on the remote control or projector cabinet. (For Direct power on (AC), Direct power on (Comp1), and Power management, see page 65; for Off timer, see page 64.) • A variety of input ports and a comprehensive array of system control interfaces This projector supports input signals on the following ports: DVI-I connector (DVI-I 29 Pin) with HDCP compatible, 15pin D-Sub, composite and S-video. • 7W built-in speaker for an integrated audio solution Powerful 7 watt speaker provides volume need for large rooms. • Auto vertical keystone correction Auto Keystone feature allows the projector to detect its tilt and correct vertical distortion automatically. (page 31) • Supporting up to UXGA resolution High resolution display - up to UXGA compatible, XGA (LV-7385/LV-7380/LV-7285/LV-7280)/ WXGA (LV-8310/ LV-8215) native resolution. • Five picture preset modes for user adjustable picture and color settings Each picture preset mode can be customized and memorized according to your preference. (page 52) • Preventing unauthorized use of the projector Enhanced smart security settings for password protection (page 40), cabinet key lock (page 62), and anti-theft 2