Canon LV-7280 User Manual - Page 47
(4) Lamp Mode and Energy-Saving Effect, Changing Lamp Mode
View all Canon LV-7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4. Convenient Features Lamp Mode and Energy-Saving Effect Selecting [Quiet] for Lamp mode will help you to reduce CO2 emissions from the projector. The Lamp mode enables you to select two brightness modes of the lamp: Normal and Quiet modes. The lamp life can be extended by using the Quiet mode. Lamp Mode Normal Mode Quiet Mode Description This is the default setting (100% Brightness). Select this mode to increase the lamp life (LV-7385/LV-8310/LV-8215: approx.75% Brightness/LV-7380/LV7285/LV-7280: approx.80% Brightness). Status of LAMP indicator Off Steady Green light Changing Lamp Mode To change the [Lamp mode] from [Normal] to [Quiet], do the following: 1. Press the MENU button on the remote control to display the menu. 2. Select [Setup] → [General] → [Lamp mode]. 3. Press the ENTER button to display the Lamp mode menu. 4. Press the button to select [Quiet] and press the OK button. 5. Press the OK button to close the menu. NOTE: • The projector has the Eco message function that will show the status of Quiet mode on screen. Select [Setup] → [Menu] → [Eco message] → [On].See page 60, 61. • The lamp life remaining and lamp hours used can be checked in [Usage time]. Select [Information] → [Usage time]. See page 66. • The projector will only operate in the [Quiet] mode for 90 seconds immediately after the lamp is turned on. The lamp condition will not be affected even when [Lamp mode] is changed. • If there is no signal for about one minute, the projector will display a blue, black or logo background (depending on setting) and go into [Quiet]. The projector will return to the [Normal] mode once a signal is accepted. • If the projector is overheated in Normal mode, there may be a case where the Lamp mode automatically changes to Quiet mode to protect the projector. This is called "forced cooling operation". When the projector is in a forced cooling operation, the picture brightness decreases. When the projector comes back to normal temperature, the Lamp mode returns to Normal mode. Thermometer symbol [ ] indicates the lamp mode is automatically set to a forced cooling operation because the internal temperature is too high. In this condition, changing [Lamp mode] setting in the menu will not affect the actual lamp mode and the LAMP indicator lights green. 38