Canon LV-7280 User Manual - Page 32
Connecting the Supplied Power Cord
View all Canon LV-7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2. Installation and Connections Connecting the Supplied Power Cord Connect the supplied power cord to the projector. First connect the supplied power cord's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet. When you press the Main Power switch to the On position (I), the projector will go into standby mode. When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green to show that [Normal] mode is selected for [Standby mode]. To wall outlet ← Make sure that the prongs are fully inserted into both the AC IN and the wall outlet. CAUTION: Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off. 23