Canon MultiPASS MP700 MultiPASS MP730 User's Guide - Page 97
Aligning the printhead
View all Canon MultiPASS MP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Aligning the printhead To align the printhead after you have just installed it, follow the procedure in the Set-Up Sheet. If you have printed the nozzle check pattern ( p. 11-4) and determined that the printhead needs aligning, align it from the operation panel ( below) or from the software ( Software Guide). Follow this procedure to align the printhead from the operation panel: 1 Load letter-size plain paper in the multi-purpose tray. 2 Press [Menu]. 3 Use [2] or [3] to select . 4 Press [Set]. MAINTENANCE 1.NOZZLE CHECK 5 Use [2] or [3] to select . 6 Press [Set]. • The machine prints a horizontal pattern. CHANGE H VALUE A 0 7 In column A on the printout, note which box has the most solid image. Note the value next to this box and use [2] or [3] to enter it. BAD SAMPLE Least solid 11 box Maintenance GOOD SAMPLE Most solid box 8 Press [Set]. 9 Repeat steps 7 and 8 for columns B to K. When all values have been entered, the LCD displays the following: PRINT VERT.PATTERN? YES=( ) NO= (#) 10 Press [T]. Chapter 11 Maintenance 11-5