Canon MultiPASS MP730 MultiPASS MP730 Quick Reference Guide - Page 55
Receiving faxes to your machine - service manual
View all Canon MultiPASS MP730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Receiving faxes to your machine Before receiving faxes to your machine Before receiving faxes, check the following: Is the power turned on? You cannot receive faxes if the power is turned off. Is the correct paper loaded in the multi-purpose tray? Load plain paper in the multi-purpose tray. For details, see the Set-Up sheet or User's Guide. Have you set the paper size setting? Before receiving faxes, you must set the paper size setting for the paper loaded in the multi-purpose tray. For details, see p. 2-4. Have you set the receive mode? Before using your machine to receive faxes, you need to set the receive mode according to how you plan to use your machine. Follow this procedure to set the receive mode: 1 Press [Fax]. 2 Press [Menu]. 3 Press [Set]. 7 Faxing with your machine -Basic operation RECEIVE MODE FAX/TEL AUTO SW 4 Use [2] or [3] to select the receive mode: • Select: - to automatically switch between fax and voice calls. Faxes will be received automatically, and the machine will ring for voice calls. - to automatically receive faxes only. Voice calls will be disconnected. - if you have subscribed to a DRP (Distinctive Ring Pattern) service offered by some companies. - for the machine to ring for fax and voice calls. Fax calls must be answered manually. - to receive faxes automatically and route voice calls to an answering machine connected to your machine. 5 Press [Set]. • The receive mode will be displayed on the bottom left of the LCD. 12/27/2003 SAT 15:30 FaxTel STANDARD Have you connected the external devices correctly? Depending on how you plan to use your machine, you may need to connect an external device to it. For details on the different connection combinations, refer to the Set-Up Sheet. Chapter 7 Faxing with your machine -Basic operation 7-7