Canon PIXMA MP560 Solución de problemas de configuración de red - Page 12
Restoring the Machine's Default LAN Settings to Perform Setup Again, Reset LAN settings, LAN settings
View all Canon PIXMA MP560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH Restoring the Machine's Default LAN Settings to Perform Setup Again Action Follow the procedure below to restore LAN settings of the machine to the default state. 1 Use the Easy-Scroll Wheel to select Settings, then press the OK button. 5 Select Yes, then press the OK button. 6 Make sure that the screen shown to the right appears. • After a while, the LAN settings screen returns. 2 Select Device settings, then press the OK button. 3 Select LAN settings, then press the OK button. The LAN setting of the machine is now restored to the default state. • Perform setup again by following the procedures in "Wireless Setup" on page 22 and onward in the printed manual: Getting Started. Wireless connection SSID Data encryption TCP/IP setting Inactive BJNPSETUP Inactive Obtain an IP address automatically 4 Select Reset LAN settings, then press the OK button. 11