Canon PIXMA MP560 Solución de problemas de configuración de red - Page 4
Check, Failed to connect to the access point. - wireless
View all Canon PIXMA MP560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ENGLISH Glossary • SSID An identifier to identify the specific access point. • SSID broadcast An access point's periodic transmission of a signal revealing its SSID. • Stealth mode A function to hide SSID in wireless connection. • MAC address A unique number assigned to each network device. • MAC address filtering A function to block access from unauthorized wireless devices by saving the MAC addresses of specific wireless devices (computers, printers, etc.) to the access point beforehand. Failed to connect to the access point. is Displayed Check Check 1 Is WEP key number 2, 3 or 4 of the access point in use? • For details on how to check the WEP key number of the access point, refer to the manual supplied with the access point or contact its manufacturer. Set to use WEP key number 1 of the access point, or select a WEP key number by entering wireless connection settings of the machine directly. • For details on how to change the WEP key number of the access point, refer to the manual supplied with the access point or contact its manufacturer. • For details on how to select a WEP key number by entering wireless connection settings of the machine directly, refer to "Entering the Access Point's Wireless LAN Settings Directly on the Machine" on page 8. Check 2 Make sure that the DHCP function of the access point is active. • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Enable the DHCP function of the access point, then configure settings again. • For details on how to change the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer.