Canon PIXMA MP560 Solución de problemas de configuración de red - Page 2
Network Setup Troubleshooting, Other Troubleshooting Tips, Problems during Network Setup - manual
View all Canon PIXMA MP560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ENGLISH Network Setup Troubleshooting This manual mainly describes problems you may encounter when setting up a network, and the possible causes and solutions. Find a description related to your problem and follow the solution. If you cannot find a description for your problem or if you encounter a problem after setup, refer to the onscreen manual: Basic Guide/Advanced Guide. • Names of functions, etc. may differ from this manual depending on your access point or application software. Problems during Network Setup P.2 Other Troubleshooting Tips Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security Protocol (encryption standard), and Network Key The Machine is Not Detected after the Network Environment is Changed Reference Information Entering the Access Point's Wireless LAN Settings Directly on the Machine Easy Settings The Target Access Point is Not Displayed (Detected) Failed to connect to the access point. is Displayed Access point was not detected is Displayed Multiple access points with the same name exist. is Displayed WPS Settings Cannot connect. Multiple access points are enabled. is Displayed Connection failed. is Displayed Problems during Software Installation The Machine is Not Displayed (Detected) Check Printer Settings dialog box is displayed Specifying the Machine's IP Address (IPv4 only) P.2 Restoring the Machine's Default LAN Settings to Perform Setup Again P.3 P.4 Connection Checklist P.4 Specifications P.5 P.5 The following symbols are used in this manual. Instructions as notes for operation or additional explanations. P.5 Description for Windows users. P.5 P.6 Description for Macintosh users. P.7 P.7 P.7 P.8 P.8 P.10 P.11 P.12 P.14