Canon PIXMA MP560 Solución de problemas de configuración de red - Page 8

ENGLISH Other Troubleshooting Tips Check 4 When obtaining an IP address automatically, make sure that the DHCP function of the access point is active. • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Enable the DHCP function of the access point, then click Back (A). • For details on how to change the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Check 5 Is the privacy separator feature enabled on the access point? • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Disable the privacy separator feature. • For details on how to change the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Glossary • IP address filtering A function to control traffic to/from specific IP addresses. • DHCP function A function that automatically assigns required information (IP address, etc.) to computers connected to the Internet. • Privacy separator feature A function to prevent communication between multiple wireless devices connected to an access point. Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security Protocol (encryption standard), and Network Key Check Check the access point settings. • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. The Machine is Not Detected after the Network Environment is Changed Check Wait until the IP address is assigned to the computer. You may need to restart your computer. • Search for the machine again after confirming a valid IP address is assigned to the computer. Glossary • IP address A numerical identification assigned to each computer or network device connected to a network.