Canon PIXMA TS6320 TS6300 series User Manual - Page 267

For macOS: Starting Up IJ Network Device Setup Utility Selecting WPA, WPA2, or WPA/WPA2 is recommended for security reason. If your wireless router is compatible with WPA/WPA2, you can also use WPA2 or WPA. • Using WPA/WPA2 (Windows) The authentication method, Wi-Fi password, and dynamic encryption type must be identical among the wireless router, the printer, and your computer. Enter the Wi-Fi password configured on the wireless router. Either TKIP (basic encryption) or AES (secure encryption) is selected automatically as the dynamic encryption method. For details, see If WPA/WPA2 Details Screen Appears. Note • This printer supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2Personal). • Using WEP The length or format of the Wi-Fi password and authentication method must be identical among the wireless router, the printer, and your computer. To communicate with a wireless router that generates a password automatically, you must set the printer to use the password generated by the wireless router. ◦ For Windows: When the WEP Details screen appears after you click Search... on the Network Settings (Wi-Fi) screen in IJ Network Device Setup Utility, follow the on-screen instructions to set the password length, format, and the password to use. For details, see If WEP Details Screen Appears. Note • If the printer is connected to an AirPort Base Station via LAN: If the printer is connected to an AirPort Base Station via a LAN, check the settings in Wireless Security of AirPort Utility. Select 64 bit if WEP 40 bit is selected for password length in AirPort Base Station. Select 1 for the password to use. Otherwise, computer will not be able to communicate with printer via the wireless router. 267