Canon Pi Optura Pi Instruction Manual - Page 25

#2_OPTURA Pi_E(07-33) 1/25/00 13:41 Page 26 (1,1) Built-in speaker and headphone terminal E The camcorder has a built-in speaker and a headphone terminal so you can review the sound track alongside the picture during playback. The built-in speaker is monaural; use headphones for stereo sound. S DC IN 9.5V A/V IN/OUT MIC Adjust the speaker and headphone volume by turning the selector dial. • Turn the selector dial up to increase the volume, and down to lower the volume. • A VOLUME bar appears in the display to indicate the current volume. It disappears in four seconds. • You can turn off the volume completely by turning the selector dial down until OFF appears. • You can also adjust the headphone volume separately from the built-in speaker, either during VCR mode or camera mode. The volume level is the same regardless of mode. • The levels you adjust for the built-in speaker and headphones are memorized separately. The camera remembers your levels even if you turn the camera off and back on again. • The speaker turns off when the camera is set to camera mode or when you use headphones. • Sometimes audio may sound distorted when the volume is turned up high. If this happens, turn down the volume. 26 Quick Overview