Canon Pi Optura Pi Instruction Manual - Page 82
See p. 85 for details of the cut-in and cut-out adjustments.
![]() |
UPC - 013803606102
View all Canon Pi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
#4_OPTURA Pi_E(79-99) 1/25/00 13:42 Page 83 (1,1) RECORDER The camera's Dubbing Function can remotely control almost all brands and E models of VCR. VCR remote control signals vary depending on model and brand. First, choose the right RECORDER setting for your VCR. The number indicates the VCR brand. The letter indicates the set of signals. Brand Canon Aiwa Akai Fujitsu Funai Hitachi JVC Mitsubishi NEC Panasonic Blaupunkt Quasar Settings 1-A to 1-C 2-A to 2-C 3-A to 3-C 4-A 5-A 6-A to 6-B 7-A to 7-C 8-A to 8-D 9-A to 9-D 10-A to10-G Brand Pioneer Sanyo Fisher Sharp Sony Toshiba GE RCA Magnavox Philips Seleco Rex Settings 11-A 12-A to12-C 13-A to 13-C 14-A to 14-F 15-A to 15-B 16-A to 16-B 17-A to 17-B 18-A to 18-C Brand Thomson Saba Nordmende Ferguson Grundig Nokia Telefunken Zenith Samsung GoldStar Settings 18-A to 18-C 19-A to 19-C 20-A to 20-C 21-A to 21-C 22-A to 22-B 23-A 24-A to 24-B 25-A as of January 2000 • Once you find the correct setting, remember this and do not change it unless you change VCRs. • See p. 85 for details of the "cut-in" and "cut-out" adjustments. • If you try all the numbers and letters, but the VCR has still not started to record: - Check the VCR is ready to record, and on pause. - Check the VCR can receive signals from where the camera is, and that nothing is blocking the signals. - Go back and try to set it again. • If your brand of VCR is not on the chart, or you cannot find the correct setting, try all the numbers with the selector dial until the VCR starts to record. • It is unlikely, but you may have a VCR the Dubbing Function cannot control. If so use the Simple Editing method on p. 87. Editing 83
![](/manual_guide/products/canon-pi-optura-pi-instruction-manual-3f00f60/82.png)