Canon Pi Optura Pi Instruction Manual - Page 59
Press the ON/OFF button.
UPC - 013803606102
View all Canon Pi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
#3_OPTURA Pi_E(34-78) 1/25/00 13:42 Page 60 (1,1) Digital effects can be set with the controls on the body of the camera or the E wireless controller. Pressing the v/w buttons on the wireless controller correspond to turning the selector dial up and down, and pressing the SET button corresponds to pressing the selector dial in. D.EFFECTS ON/OFF MENU SET D.EFFECTS ON/OFF P Using the Full Range of Features Operating faders Sound and image fade together. When operating faders while recording, make sure the program selector is set to Q. Set fader 1. Press the D.EFFECTS button to open the digital effects menu. 2. Move the arrow up and down with the selector dial. • Point the arrow at FADER. 3. Press the selector dial in. • FADE-T, WIPE, SCROLL, M.FADE settings appear. 4. Turn the selector dial. • Point the arrow at your selected setting. 5. Press the D.EFFECTS button. • The menu disappears and your selected setting flashes in the display. Fader on/off 6. Press the ON/OFF button. • Your selection stops flashing. • Each time you press the ON/OFF button, the chosen fader is activated (display lights continuously) or deactivated (display flashes). 7. If you're in camera mode: Fade in- Press the start/stop button. Fade out- Press the start/stop button. If you're in VCR mode: Fade in- Press the PLAY button. Fade out- Press the PAUSE button. 60