Canon Pi Optura Pi Instruction Manual - Page 79
Setting the camera to control your VCR
![]() |
UPC - 013803606102
View all Canon Pi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
#4_OPTURA Pi_E(79-99) 1/25/00 13:42 Page 80 (1,1) 4. Open the VCR menu and select \DUB MODE. E • When you select the DUB MODE menu all the displayed information is also displayed on the screen of the TV connected your VCR. However, this information will not be recorded onto the tape in the VCR. Setting the camera to control your VCR The camcorder's Dubbing Function controls your VCR by using the same infra-red signals as the VCR's remote control. Make sure the camera is in a spot where it can remotely control your VCR. Infra-red signals transmitter 1. Check where the remote control sensor is on your VCR using its normal remote control. 2. Place the camera pointing directly at the sensor, not more than 20 inches (50 cm) away. • Check that the sensor will pick up signals easily from this spot using the VCR's normal remote control. • Make sure that the cables and the camera's shoulder strap do not obstruct the signals. 3. Make sure that the VCR is in record pause mode. 4. Make sure that all other video equipment is turned off to avoid accidental recording. Editing 80
![](/manual_guide/products/canon-pi-optura-pi-instruction-manual-3f00f60/79.png)