Canon PowerShot SX120 IS PowerShot SX120 IS Camera User Guide - Page 121
Displaying the Overlay, Changing the IS-Mode Settings
View all Canon PowerShot SX120 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Changing Shooting Functions Displaying the Overlay You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints. ● Choose [Disp. Overlay], then press the qr buttons to choose an option. Grid Lines 3:2 Guide Both A grid overlays the display. The areas outside the 3:2 range are grayed out. This area will not print when printing on paper with a 3:2 aspect ratio. Both grid lines, and the 3:2 guide will display. • In mode, you cannot set [3:2 Guide] or [Both]. • Grid Lines will not be recorded on the image. • The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas. Changing the IS-Mode Settings ● Choose [IS Mode], then press the qr buttons to choose an option. Image stabilization is always on. You can Continuous confirm the result directly on the display, which makes it easier to check the composition or focus. Shoot Only Image stabilization is only active at the moment of shooting. Panning Image stabilization only counters up and down motion. This option is recommended for shooting objects moving horizontally. • If camera shake is too strong, attach the camera to a tripod. It is recommended to set the IS Mode to [Off] when the camera is attached to a tripod. • When using [Panning], hold the camera horizontally. Image stabilization does not work when the camera is held vertically. 121