Canon RC-IP100 Remote Camera Controller User Manual - Page 8

Operation, Selecting and Operating a Camera, Selecting a Camera

Get Canon RC-IP100 PDF manuals and user guides View all Canon RC-IP100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Operation Selecting and Operating a Camera Selecting a Camera Follow the steps below to specify a camera number and select a camera to operate. . 1 Display the home screen. If the home screen does not appear, tap the [HOME] button on the screen. 2 Tap the left/right buttons of [CAM Group] at the bottom of the operation panel to select a camera group. 3 Tap the left/right buttons of [CAM Number] at the bottom of the operation panel to select a camera number. Memo : 0 [Camera Number/Camera Group] under the [CAMERA/ PRESET] tab can also be used to select a camera using the following steps. 0 Tap [Group] to light up the button, followed by selecting a group number. 0 Tap the [Group] button again to turn off the button's light, followed by tapping a camera number. Operating a Camera Operating the PTZ (pan/ tilt/ zoom) 1 Select a camera to operate. (A P8 "Selecting a Camera") 2 Tilt the control lever toward the direction you want the camera to move (pan/ tilt operation). 0 Tilt the lever to the left and right to move horizontally (pan) and tilt it up and down to move vertically (tilt). 0 The speed of the pan/tilt operation can be adjusted using the F1/F2/F4 knobs. (A P9 "Changing an Assigned Function") 0 The movement speed changes depending on the tilt angle of the lever. 3 Operate the zoom lever to adjust the size of the field of view (zoom operation). 0 Press the T-end of the lever to magnify the subject (Telephoto) and press the W-end to make the subject appear smaller (Wide-angle). 0 The zoom speed changes according to the extent the zoom lever is being pushed. 0 Zoom operation can also be performed by assigning the F3 knob with the "ZOOM" function. (A P9 "Changing an Assigned Function") 0 The zoom movement speed changes depending on the angle of rotation of the lever. Performing focus operation 1 Set the focus mode to "MF". Assign the USER1 or USER2 button with "Focus Mode", followed by tapping the button to switch to MF. (A P9 "Changing an Assigned Function") 2 Turn the F1 knob. Turn counterclockwise: Focus on near objects. Turn clockwise : Focus on distant objects. Memo : 0 The F2, F3 or F4 knob can also be assigned with the focusing function. (A P9 "Changing an Assigned Function") One-Shot AF Tapping the F4 knob performs focusing automatically. The focus mode switches to MF. Memo : 0 The F4 knob needs to be assigned with "Focus/One Shot AF". 8 Selecting and Operating a Camera

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
Selecting and Operating a
Camera
Selecting a Camera
Follow the steps below to specify a camera number and select
a camera to operate.
.
1
Display the home screen.
If the home screen does not appear, tap the [HOME] button
on the screen.
2
Tap the left/right buttons of [CAM Group] at the
bottom of the operation panel to select a camera
group.
3
Tap the left/right buttons of [CAM Number] at the
bottom of the operation panel to select a camera
number.
Memo :
0
[Camera Number/Camera Group] under the [CAMERA/
PRESET] tab can also be used to select a camera using the
following steps.
0
Tap [Group] to light up the button, followed by selecting a
group number.
0
Tap the [Group] button again to turn off the button’s light,
followed by tapping a camera number.
Operating a Camera
Operating the PTZ (pan/ tilt/ zoom)
1
Select a camera to operate.
(
A
P8 “Selecting a Camera”)
2
Tilt the control lever toward the direction you want
the camera to move (pan/ tilt operation).
0
Tilt the lever to the left and right to move horizontally (pan)
and tilt it up and down to move vertically (tilt).
0
The speed of the pan/tilt operation can be adjusted using
the F1/F2/F4 knobs.
(
A
P9 “Changing an Assigned Function”)
0
The movement speed changes depending on the tilt angle
of the lever.
3
Operate the zoom lever to adjust the size of the
field of view (zoom operation).
0
Press the T-end of the lever to magnify the subject
(Telephoto) and press the W-end to make the subject
appear smaller (Wide-angle).
0
The zoom speed changes according to the extent the
zoom lever is being pushed.
0
Zoom operation can also be performed by assigning the
F3 knob with the “ZOOM” function.
(
A
P9 “Changing an Assigned Function”)
0
The zoom movement speed changes depending on the
angle of rotation of the lever.
Performing focus operation
1
Set the focus mode to “MF”.
Assign the USER1 or USER2 button with “Focus Mode”,
followed by tapping the button to switch to MF.
(
A
P9 “Changing an Assigned Function”)
2
Turn the F1 knob.
Turn counterclockwise:
Focus on near objects.
Turn clockwise
:
Focus on distant objects.
Memo :
0
The F2, F3 or F4 knob can also be assigned with the focusing
function.
(
A
P9 “Changing an Assigned Function”)
One-Shot AF
Tapping the F4 knob performs focusing automatically. The focus
mode switches to MF.
Memo :
0
The F4 knob needs to be assigned with “Focus/One Shot
AF”.
8
Selecting and Operating a Camera
Operation