Canon REALiS LCOS WUX6000 MULTIMEDIA PROJECTOR WUX6000 Users Manual - Page 151
Specifying the Menu Display Time, Showing/Hiding Lamp Replacement Warnings
View all Canon REALiS LCOS WUX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Installation-Related Menu Settings Specifying the Menu Display Time > [Install settings] > [On screen] > [Menu display time] HDMI Digital PC Component Analog PC LAN USB The setting for the menu display time can be extended from the normal 10 or 30 seconds to 3 minutes. Showing/Hiding Lamp Replacement Warnings > [Install settings] > [On screen] > [Lamp warning display] HDMI Digital PC Component Analog PC LAN USB A message that advises you to change the lamp can be set to display when the lamp has been used for the specified period of time. Installation and Maintenance Installation Normal Extended The menu is displayed for 10 or 30 seconds. The menu is displayed for 3 minutes. Press the OK button to accept your setting and then press the MENU button. • [Normal] is the factory default. • The following display times are also changed. Item [Normal] [Extended] - MENU screen 30 3 seconds minutes - Input (P40) - Keystone adjustment (P54) - Keystone reset (P56) - Focus adjustment (P44) - Zoom adjustment (P45) - Lens shift adjustment (P46) - Lens shift reset (P147) - D.image shift adjustment (P50, P51) 10 seconds - D.image shift reset (P52) - Aspect (P53) - Image Mode (P57) - Volume adjustment (P63) - Gamma correction (P87) 3 minutes Off The prepare lamp message and the lamp warning are not displayed. On The prepare lamp message and the lamp warning are displayed. When it is time to replace the lamp, the LAMP indicator on the projector will flash, and lamp replacement (P199) is recommended at this time. Press the OK button to accept your setting and then press the MENU button. • The factory default is [On]. 151