Canon REALiS LCOS WUX6000 MULTIMEDIA PROJECTOR WUX6000 Users Manual - Page 79

Setting Display Status (Input Settings) Adjusting HDMI Input Level > [Input settings] > [HDMI input level] HDMI Digital PC Component Analog PC LAN USB You can select this as required when you project visual software using an HDMI signal. Setting the HDMI Color Format > [Input settings] > [HDMI color space] HDMI Digital PC Component Analog PC LAN USB Select the color space for the HDMI signal. Operation Setting Functions from Menus Auto Automatically switches the input level based on the input signal. Normal Limits the input level to 16-235. Expanded Enables a full input level of 0255. Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. • You can select this only when the type of signal sent from AV equipment is RGB. • The signal level is selected automatically in [Auto] mode. (Some AV equipment may not support this.) • If the HDMI output of your AV equipment allows switching between [Normal] and [Expanded], we recommend you to set [Expanded]. The contrast of images will be improved and dark scenes will be rendered more realistically. In this case, select [Auto] or [Expanded] for [HDMI input level]. For more detailed information, refer to the user's manual for the AV equipment connected to the projector. Auto Selects the optimal color format for the input HDMI signal. RGB Forces the projector to handle the input signal as an RGB signal. YCbCr Forces the projector to handle the input signal as a color difference signal. Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. 79