Canon REALiS LCOS WUX6000 MULTIMEDIA PROJECTOR WUX6000 Users Manual - Page 161
Fine-tune the position and width of area B., As you watch the image, adjust the width of areas A, B
View all Canon REALiS LCOS WUX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Installation and Maintenance Installation Installation-Related Menu Settings 2 Select [B-width], and use the remote's [ ] [ ] buttons to specify the width of area B. This will make the width of area D narrower. 3 Adjust the width of area B to roughly match the area where the black level is noticeable, and then use the following edge-blending settings to adjust the black level of area B. Adjust the black level of area B the same way as you adjusted it for area D. Black level B-area base Adjust the area B black level. B-area red Adjust the red component of the area B black level. B-area green Adjust the green component of the area B black level. B-area blue Adjust the blue component of the area B black level. For adjustment instructions, see "Advanced Instructions: Black Level Adjustment" (P158), step 3. Results of adjusting the black level of area B are applied to all sides. 4 Fine-tune the position and width of area B. 5 As you watch the image, adjust the width of areas A, B, and C. 6 Readjust the black level of area B, as needed. 7 When you have completed the adjustment, press the MENU button. • [Off] is the factory default. • To reduce distracting colors and colors that are out of alignment in areas where the images overlap, perform [Color blending adjustment] targeting the main tone in the envisaged projected image. If you perform adjustments using [Color blending adjustment] or other menus, that may not eliminate the distracting colors and differences in brightness in areas where the images overlap. 161