Canon REALiS LCOS WUX6000 MULTIMEDIA PROJECTOR WUX6000 Users Manual - Page 189
Error Notification Mails, Resetting Network Settings to the Default Settings, Error list
View all Canon REALiS LCOS WUX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Completing Computer Settings Resetting Network Settings to the Default Settings 1 Perform steps 1 - 3 on "Displaying the Network Configuration Screen" (P177) to display the settings screen. 2 Click [Initialize]. Installation and Maintenance Connecting to a Network 3 A confirmation window appears. Click [OK]. ■ Error Notification Mails The messages shown in the following error list are sent when an error occurs in the projector. Error list Errors related to temperature Errors related to the lamp Errors related to the fan Errors related to the air filter Error name Text Error name Text Error name Text Error name Text Temperature abnormality The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its inside, and retry projection. If the same warning occurs again, the projector may be defective. Contact your dealer. Faulty lamp The lamp has burnt out. Replace the lamp with a new one. If the same warning occurs again, the lamp drive circuit may be defective. Contact your dealer. Faulty cooling fan The cooling fan or another component may be defective. Contact your dealer. Faulty air filter unit The air filter unit is not installed properly. Check whether the air filter unit is installed properly. If it is installed properly, the air filter unit detection switch may be defective. Contact your dealer. 189