Canon REALiS WUX500 Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 128
Basic Wireless Network Settings [Wireless]
View all Canon REALiS WUX500 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Menu Description Basic Wireless Network Settings [Wireless] From [Wireless] on the settings screen, you can complete basic network information for wireless connections. For the setting procedure, refer to "Network Setting" (P124). Item MAC address DHCP IP address Subnet mask Default gateway Wi-Fi Protected Setup Mode Select SSID Security Channel Explanation Factory default setting Shows the projector's wireless MAC address. The projector's wireless MAC address Select whether to turn the DHCP function on or off for wireless connections. If the function is on, because the IP address is acquired from the server, it is not possible to enter the [IP address], [Subnet mask], and [Default gateway]. OFF Enter the projector's wireless IP address in 1-byte numbers. 192.168.253.254 Enter the wireless subnet mask in 1byte numbers. 255.255.255.0 Enter the wireless default gateway IP address in 1-byte numbers. 0.0.0.0 Select a simple method of establishing None (configure a wireless connection. manually) Select the wireless connection mode. infrastructure mode Select the wireless access point's SSID. Click the [Refresh] button to update the list. If the SSID is not listed, enter it in single-byte alphanumeric characters (132 characters). Select the wireless security setting. Open Shows the wireless channel number. 1 When [Mode] is set to projector access point (PJ AP) mode, a channel can be selected. 128