Canon REALiS WUX500 Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 95
Remote control channel, Audio in terminal select, Selecting the Projector Channel
View all Canon REALiS WUX500 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Menu Description Remote control channel Separate channels can be assigned to up to four projectors so that a single remote control can be used with each projector. Selecting the Projector Channel If an optional wired remote control (RS-RC05) is used, there is no need to set the remote control channel. Option Function Ch1 Ch2 Ch3 Select the remote control channel to use with this projector. Ch4 Independent Can be controlled from a remote control set to any channel. Selecting a Channel on the Remote Control After changing the projector channel from the menu, always change the remote control channel accordingly. Ch1 Ch2 Ch3 Ch4 Independent Hold both the OK button and [ ] button for 3 seconds. Hold both the OK button and [ ] button for 3 seconds. Hold both the OK button and [ ] button for 3 seconds. Hold both the OK button and [ ] button for 3 seconds. Hold both the OK button and MENU button for 3 seconds. Audio in terminal select Select the source terminal for audio output. Option Function Off No audio is output. Audio in 1 Use audio signals from AUDIO IN 1 for audio output. Audio in 2 Use audio signals from AUDIO IN 2 for audio output. HDMI Use HDMI audio signals for audio output. HDBaseT Use HDBaseT audio signals for audio output. LAN Use LAN audio signals for audio output. Audio is transferred by the NMPJ application. Advanced Guide Menu Description 95