Canon REALiS WUX500 Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 53

Projection Procedure Focusing, Resizing, or Moving the Image ■ Adjusting Image Focus Focus ring To adjust the focus, turn the focus ring. Focus adjustment ■ Adjusting Image Size To adjust the image size, turn the lever on the projection lens. Change the projector installation position (P38) if your desired image is too large or too small to adjust it with the zoom function. Basic Guide Projection Procedure ■ Adjusting the Image Position Turn the lens shift dials to adjust the projected image vertically or horizontally. Called "lens shift," this adjusts the projected image into position by moving the lens up, down, left, or right. • Instead of adjusting where the image is projected, you can also move the image itself. For details, refer to "Digital image shift" (P85). • You can fine-tune the image position by turning the upper part of the upper lens shift dial or the lower part of the lower lens shift dial. Manual adjustment using the lens shift 2 dials moves the image as follows. 4 For details on lens shift, refer to "Lens Shift Function" (P41). 3 1 2 4 1 3 53