Canon RP10 for CR-120/150 RP10 User Guide - Page 28

Others • When using a UV lamp frequently, take extra care about paper shrinking due to heat (in the feeding/sub-feeding (paper width) directions), or about color fogging. • The paper surface is slippery. Apply slightly stronger drive roller pressing force. • If you want a higher PCS value for the mark for position detection, perform overprinting. • Depending on the type of preprinted paper, sticking, etc. may occur. Make sure to evaluate such phenomena using the printer that you actually use. Specifications Printer Specifications Print Method Thermal Line-dot Printing Printing Direction Unidirectional with friction feed Dot Density 8 dot/mm Paper Feeding Pitch 0.125 mm Cutter Method Full cut / Partial cut Max Print Width About 72 mm Print Speed Up to 150 mm/sec. Interface USB 2.0 Full speed (12 Mbps) Operating 0 to 40°C (32 to 104°F) Temperature 7.5 to 32.5°C (45.5 to 90.5°F) (Print Quality assurance) Operating Humidity 30 to 85% RH (no dew condensation) Storage Temperature -30 to 50°C (-21 to 122°F) Storage Humidity 10 to 90% RH (no dew condensation) Dimensions 135 mm (H) x 170 mm (W) x 280 mm (D) (5.31" (H) x 6.7" (W) x 11" (D)) Weight 1850 g (4.1 lb) Power Supply AC 100-240V 50/60Hz Power Consumption Printing: Maximum 55W Sleep mode*: 0.7W * This printer will automatically enter sleep mode after a certain amount of time passes without operation. With power switch OFF: 0.4W Paper Specifications Type Width Outer Diameter Inner Diameter Thickness Thermal Roll Paper 80+0, -1 mm Up to φ83 mm φ8 mm or more 60 to 100 µm Option Top board (Product Code: 3107C001) This is an accessory used for installing a CR-50/80 Check Scanner on the printer. 28