Canon RP10 for CR-120/150 RP10 User Guide - Page 8

Power Supply • Connect only to a power outlet of the rated voltage and power supply frequency (either 120V, 60Hz or 220-240V 50/60Hz, depending on your region). • Make sure that the printer is connected to an independent power outlet. Do not plug the printer into an outlet shared with another device. If you use an extension cord, make sure that the extension cord is rated for the current requirements of the printer. • If you are unsure of anything relating to the power supply, contact your local authorized Canon dealer or service representative for further information. • Never place an object on top of the power cord or step on the power cord. • Never bundle the power cord or wrap the cord around an object, such as a table leg. • Do not tug on the power cord. When you remove the power cord, grip it by the power plug head. • Keep the area around the power outlet free of obstacles. Moving the Printer When you move the RP10, hold it firmly with both hands and carry it carefully. The printer weighs approximately 1850 g (4.1 lb). WARNING When moving the printer, be sure to remove any cables. If the cables are not removed before moving the printer, you may damage the plug or connector by forcibly pulling them it. 8