Canon RP10 for CR-120/150 CR-120/150 User Guide - Page 40
AA BB AA BB CC DD EE, Scanner Name Setting], Scanner Name, Network Setting]
![]() |
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
[Maintenance Setting] [Maintenance Setting] screen is displayed. [Scanner Name Setting] A • When searching for scanners on the network to select a scanner with Scanning Utility, the Scanner Name is displayed here. For details, see "How to Use the Scanning Utility" on p. 28 [Network Setting] A B C D B [Scanner Name] A Set an unique name for the scanner that will be used so that it can be correctly identified on the network. [OK] B Click [OK] to send settings to the scanner. NOTE • Scanner Name must be 1 to 15 characters in length. The following arbitrary characters can be entered. Numerals: 0 to 9* Alphabetic characters: A to Z , a to z and hyphen (-) * * The scanner name must start with 'a-z' or 'A-Z' and cannot end with '-' 40 E [DHCP] A Check (ON) to automatically assign the IP address of the scanner. [IP Address] B Set the IP address of the scanner. [Subnet Mask] C Set the Subnet Mask of the scanner. [Default Gateway] D Set the Default Gateway of the scanner. [OK] E Click [OK] to send settings to the scanner.
![](/manual_guide/products/canon-rp10-cr120150-cr120150-user-guide-efe0626/40.png)