Canon RP10 for CR-120/150 CR-120/150 User Guide - Page 9
Wired LAN Connection, Connecting the Power Cord, Ethernet connection CR-150N/120N only, WARNING
![]() |
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Wired LAN Connection Ethernet connection (CR-150N/120N only) Allows the use of this scanner from other computers connected to the network. Prepare a LAN cable separately. LAN Port Connecting the Power Cord Connect the power cord. Make sure to use only the power cord provided with the scanner. NOTE • If connecting to the computer through this scanner confirm if the computer is able to connect to the network. • The settings method and configuration of network devices such as routers vary depending on the environment in which they are being used. Refer to the manual of the network device for details. WARNING When connecting the power cord, follow these precautions. Failure to do so may cause a fire or electrical shock. • Never grasp the power plug when your hands are wet. • Never plug the scanner into a multiplug power strip. • Never bundle or tie the power cord around itself or another object. Connect the power plug securely into the power outlet. • Use only the power cord and power plug provided with the scanner. • Connect only to a power outlet of the rated voltage and power supply frequency (either 100-120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region). • Do not plug the scanner into a power outlet shared with another device. If you use an extension cord, make sure that the extension cord is rated for the current requirements of the scanner. 9
![](/manual_guide/products/canon-rp10-cr120150-cr120150-user-guide-efe0626/9.png)