Canon RP10 for CR-120/150 CR-120/150 User Guide - Page 79
Adjust the Adjustment Dial to 6., Replace the Roller Cover.
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
G Attach the Pickup Roller. Align the notch on the roller axis with the hole on the roller. I Attach the Feed Roller. Align the notch on the roller axis with the hole on the roller. IMPORTANT Push down the roller until it clicks into place. H Attach the Separation Roller. Align the notch on the roller axis with the hole on the roller. IMPORTANT Push down the roller until it clicks into place. J Adjust the Adjustment Dial to 6. For more information, see "Adjusting the Separation Roller Gap," on p. 80. K Replace the Roller Cover. IMPORTANT Push down the roller until it clicks into place. 79
79
G
Attach the Pickup Roller. Align the notch on the roller axis with
the hole on the roller.
IMPORTANT
Push down the roller until it clicks into place.
H
Attach the Separation Roller. Align the notch on the roller axis
with the hole on the roller.
IMPORTANT
Push down the roller until it clicks into place.
I
Attach the Feed Roller. Align the notch on the roller axis with
the hole on the roller.
IMPORTANT
Push down the roller until it clicks into place.
J
Adjust the Adjustment Dial to 6.
For more information, see “Adjusting the Separation Roller Gap,”
on p. 80.
K
Replace the Roller Cover.